Free Indian Channel Frequencies On Hotbird 13.0e

goldsmith Nadine Cieri: The Making of a gem - to recognize you find gems - the star trailer

goldsmith Nadine - Nadine Cieri

I would like to invite you, to me at work a bit to look over his shoulder, a goldsmith in the truest sense of the word craft. We are working with your hands, so you still can not clean still intact:) Sometimes when soldering must also be one or the other hair believe it ... Nevertheless, it is for me the best job I can imagine!

can now turn to this piece in the pictures it the emergence of the star trailer follow:

is first sketched the shape on a silver plate (eingerizt with a needle) and cut out.

scriber with the same free hand scrolls are brought to the star. To this then saw out in the next step, it is first necessary holes are drilled.

through the holes, the saw can be clamped. On the nail filing, one finds the necessary support to execute Sägung clean. To avoid jamming the saw teeth stripped off the saw and with wax.

is now soldered to the back of an eye, while the curved wire is held with forceps. With the blowpipe in the other hand, the whole heated until the solder has flowed. To get the solder to Flissen the parts must be clean and brushed with flux (borax). The whole piece must then be heated evenly.

After brazing and quenching the trailer would look like this. Through the heat and the heating flux is oxidized and is all black by pickling (acid) again cleaned.

On the big engine, the surface is roughened by means of a ground-stroke brush. This eye protection is essential, as dissolve the fine metal needles can and then ride down the pelt with properly through the area.

come the end the fine work.
The sides of the star are filed and finishes, so that no violation can. I then matted the trailer until the brush stroke Matt and then polished the edges again.



finished !!!!!